How and with what you can illuminate your hall or larger areas well
Let there be light! As far as possible without hearing electricity bills! Fortunately, you no longer need to terminate your home loan and savings contract if you want to illuminate a hall. Thanks to LED technology, this is already quite easy and inexpensive to do nowadays. Different models and possibilities come into consideration, because LED technology has long since conquered not only domestic lighting, Christmas lighting and car lighting, but also industry.
In this guide we explain how an LED works, what you need to convert your hall, how expensive it will be, how much you can save and what to look for in the bestseller 2024: The best and most popular in the top 10 comparison | Honest tests should be taken into account. Push the Button, here comes the new way to illuminate. – LED hall spotlights – bestsellers 2024: The best and most popular in the top 10 comparison | Honest tests
LED high bay lights - in comparison
Video: LED high bay spotlights
What is a high bay LED spotlight?
An LED high bay spotlight is actually just the big brother of the normal one LED bulbs. The technique is the same. The difference is in the spotlight itself. Of course, it has to do more, which means that usually several LEDs are built into the high bay spotlight. The housing is dust and splash-proof. The LED industrial spotlights are of course more expensive. However, this quickly pays off if the technology is used for longer and, above all, often. Packed with watts from the start and very robust, the new technology ensures low-maintenance operation.
Luxury
The lux illuminance indicates how bright the illuminance is. There is even a DIN standard for this, DIN EN-12464. This defines how bright it has to be at certain points in an industrial hall.
Candle
This is used to measure a part of the range. While normal lightbulbs shine all over the room, LEDs can illuminate a certain angle.
Lumen
Lumen has prevailed after Watt. This allows you to compare the LED strength. You therefore need the specified lumens to plan the installation and attachment of the LED technology. Since watts are not the same as lumens, pay attention to the LUMEN OUTPUT. This is the actual brightness.
shock resistance
This is also important and is measured according to a degree. An IK08 degree is permitted for industry. Open to the top, of course.
protection classes
The emitters are also subordinate to different protection classes. If possible, select protection class I. These are earthed with a protective conductor that is reliably earthed in the event of an operating fault with uncontrolled current flow.
Replaceable LED
The technology is relatively robust and requires little maintenance, but LEDs can of course fail or break. Look for replaceable LEDs, also to save costs.
Kelvin
The temperature of the light is measured with Kelvin. For comparison, the sun around noon is around 5800 K (Kelvin). Many people have health problems if the light sources are too “hard”. For this reason, if you do not want to distribute headache tablets, choose a light that does not restrict your employees, i.e. something below 5800 K.
Cooling
Good technique prevents you from dying of yourself, like here. Since the technology has to withstand a very high temperature, the luminaires have their own small cooling systems. The better this cooling works, the longer the lights will last.
Symmetrical / asymmetrical reflector
This is about light control. Asymmetrical means that there is a dominant light distribution, while symmetrical means that large areas are evenly illuminated.
Light band
For wide rooms that need to be illuminated over a large area, light strips are also very suitable. These look like the good old neon tubes, but are based on LED technology. With this information you have an overview of the options available to you. All products have this information listed so that you know exactly what you need. NOTE: An LED mixes blue and yellow light to get white. Blue light penetrates the retina almost unhindered. This promotes inflammatory processes in the body, in the worst case the photoreceptor cells die.
Too many proteins are formed and the aging process accelerates rapidly. For this reason, do not look directly into the LED. Please instruct your employees accordingly. Another source of danger is "flickering". It is not consciously perceived, yet it is there. It is caused by the poor quality of the LED technology and can also be due to a fluctuating power supply. Dizziness, ringing in the ears or headaches can result.
Which options are available?
Once it is clear what the new technology is measured by or what it is measured by, there are further options for optimizing the whole thing for personal needs. Motion detectors are ideal for places where people do not work continuously. LED outdoor lighting, for security and deterrence, is also useful at night and on weekends. There are also substantial grants that provide companies with financial support for retrofitting. Note: DIN EN-12464 is a workplace guideline that stipulates the minimum values for lighting. Also for emergency lighting.
motion detector
Motion detectors are ideal for areas that are not permanently accessed. The "on and off" of the technology does not harm either the technology or the wallet.
State funding
The state funding varies slightly from state to state, but it is still worth taking a look, up to 75% can be funded. The exact list can be found in the Federal Gazette, an excerpt here. Accordingly, the following are funded:
- Schools
- public and non-profit organizations
- Sports Clubs
- Kindergärten
- Religious communities
- Communes
- private companies in the field of industrial and commercial areas
- legal associations of companies
- and others, also in the context of
- Climate protection concepts
Local guidelines https://www.ptj.de/lw_resource/datapool/systemfiles/cbox/1688/live/lw_bekdoc/kommunalrichtlinie_vom_22._juni_2016.pdf
The "big ones" in particular benefit from support. The extent to which the costs can be passed on to smaller companies must be clarified on a case-by-case basis.
lighting control
A switched on light control is particularly efficient. This is supported by a power supply unit.
Possible energy savings
How much should it bring now? Most people know that LED technology can save up to 70 percent electricity. But now it is also because of how high the quality of the technology is. If you immediately shy away from the perhaps higher acquisition costs, you should take a closer look. In comparison, inferiority scores worse. For large companies, one or the other consultation is worthwhile. In this way, several thousand euros can be saved annually in large companies. Basically logical. Quality pays off. And not just on the electricity bill at the end of the year.
What should an LED industrial spotlight bring with it?
In order to achieve satisfactory results, attention should be paid to high quality. This also means that the technology can be installed well and safely. The lights must be screwed securely, be shock and water-proof and require a stable power supply. They usually cope with small fluctuations well, if you are already running your power grid at the limit of your load capacity, the LEDs will sometimes break. The whole package is important. A lot of light is required, especially in large halls, and nobody is interested in failed technology. As the year goes on, the luminaires become all the more expensive. A long service life is also important.
What to look for in the bestseller 2024: The best and most popular in the top 10 comparison | Honest tests should be taken into account
Not all watts are the same, it's all about the lumens. Then there are the operating costs, consumption and service life. The better the housing, the technology, the chip and the cooling, the more efficient the entire system is - and that becomes noticeable at the end of the year. What is added, not necessarily in the first, but savings are made in the following years. So the installation costs must also be included. Real savings are made by those who plan for the longer term.
Advantages and disadvantages
The disadvantages can be seen in the higher costs that arise first and some people do not tolerate the light very well. The advantages can be clearly seen on the other hand:
- hardly any maintenance
- longer operating time
- Controllable
- better and more precise illumination of the work area
- lower energy costs
Various conversion calculators on the Internet give pretty precise information about which lumens are to be expected. A company that is already well-lit can therefore convert it more easily. Sometimes, however, a completely new concept is necessary.
Conclusion: LED high bay lights
The companies have already converted a lot to LED technology. This technology is also increasingly being used in private houses, garages and outside areas. And as with every new "invention", not everything is always equally good. There are a few things that need to be taken care of so that you don't land a failure. And the more you know yourself, the less you have to believe others. In this case, the conversion to LED, the corresponding background knowledge does not harm either.
LED spotlights in “daylight white” are provided for the halls and companies, as everything can be seen best at this color temperature. That means 5000 K or 6500 K. In view of the problems that some people have with the LED, it is advisable to keep to the natural light temperatures, such as the sun. So it means 500 K instead of 6500 K. A light control ensures that the light reaches where it is actually needed.
This is good for the environment and does not damage technology. Good cooling ensures, among other things, a longer service life. There are DIN standards so that decisions are not made based on guesswork. Clever who benefits from government funding. And those who plan for the long term are even smarter.
Discover the top 10 of the best and best-selling LED hall spotlight products in 2024 on honest tests. We show a selection of the most popular items that have great customer reviews and value for money. Find the perfect LED hall spotlight product for your needs now!
Reading tips: coole DIY Projects | Fitness | You like product testing read?
- Test: Glückstoff - storage box made of fabric | Vintage
- Test: Kärcher high-pressure cleaner K3 | Premium Power Control
- Sportstech RSX500 rowing machine review | 16 programs for the perfect back training
- Test: pull-up bar by Pullup & Dip | Wall Mount & Detachable | Indoors & Outdoors
- Test: TonieBox by Tonies | Music & radio plays for children
- Sonic electric toothbrush | Fairywill FW-507 tested
On Honest tests you can find some tests (including pool, Fitness, Home & garden) & Guide (including Smart Home, Beauty, Handcraft) who can help you further.
Tip: An Gift Idea or Birthday gifts should never be cheap products, don't give away anything that you wouldn't use yourself in terms of quality.
Lots of positives Buyer ratings are often a sign that people are satisfied with the LED indoor spotlight product.
Recommended reading: massage gun, Fitness Bike, product testing
Sources: https://www.ledmarkt24.de/led-hallenstrahler-und-beleuchtung-online-top-10
https://www.ledmarkt24.de/led-hallenstrahler-und-beleuchtung-online-top-10
* Product images & links | Source: Amazon PA API | Last update on 19.04.2024/XNUMX/XNUMX | * = Affiliate links | Prices quoted on this website may have changed. The actual price of a product can be found on the seller's website. Real-time updates are technically not possible. Prices including VAT plus shipping costs
